Air/Oil Lubrication

Rapidly expanding Air/Oil lubrication technique is replacing both Mist Systems and Oil re-circulation systems

Several applications can benefit from Air/Oil System and from the substantial cost savings that can be achieved using it.
Dropsa offers many articulated solutions to Air/Oil Lubrication - the VIP4 Family of products is the latest addiction to this range.

Advantages:
- Fully Integrated Monitoring
- Modular concept
- Integrated or Remote Cycle Control.
- Simple Interfacing.
- Low Cost
- Cooler bearing
- Higher Speeds
Typical Applications:
- Spindle Lubrication
- Bearings
- High Speed Bearings
- Spindles
- Gears

Air/Oil Lubrication basic concept

Air/Oil Lubrication consists of an Air Stream, that normally operates continuously, used to provide cooling to the lubrication point and as a transport medium to carry small quantities of oil to the lubrication point.
The oil-injected into the air stream at regular intervals coats the surfaces to be lubricated and reduces friction and wear.